English
Español
Português
Русский
Deutsch
Francés
العربية
한국어
Türk
日本語
Push-Pull Intelligent Insulating Glass Gas Filling Machine
1. Two gas-filling modes: (1) Time-based mode: Automatically fills gas for a preset duration and stops once the time elapses. (2) Detection mode: Automatically monitors gas concentration via the control system and stops filling once the target level is reached.
2. High efficiency: Capable of filling up to four insulating glass units simultaneously.
3. Adjustable parameters: Parameters such as gas concentration, filling duration, and pre/post-fill times can be customized for flexibility and convenience.
4. Touchscreen interface: Displays real-time status indicators, providing a clear view of operations for easy monitoring by the operator.
5. Simple operation: Easy to use with no specialized training required; regardless of the filling mode, the entire process is controlled simply by pressing the "Start" and "Stop" buttons.
1. After inflating, it can reduce the internal and external pressure difference, maintain pressure balance, and reduce glass explosion caused by pressure difference.
2. After filling with argon gas, the K value of the insulating glass can be effectively improved, reducing condensation on the indoor glass and improving the comfort level. That is, the inflated insulating glass is less prone to condensation and frost.
3. Due to the characteristics of argon as an inert gas, it can slow down the heat convection in the insulating glass, and at the same time, it can also greatly improve its sound insulation and noise reduction effect, that is, it can make the insulation and sound insulation effect of the insulating glass better.
4. It can increase the strength of large-area insulating glass so that the middle part does not collapse.
5. Increase wind pressure resistance.
6. Because the filled gas is a dry inert gas, it can replace the moisture-containing air in the insulating glass cavity, keeping the environment in the cavity dry and extending the service life of the molecular sieve in the aluminum spacer frame.
7. When using low-emissivity LOW-E glass or coated glass, since the filled gas is an inactive inert gas, it can protect the film layer, reduce the oxidation rate, and extend the service life of the coated glass.
Technical Specifications:
1. Argon gas supply: Pressure 0.15 MPa, flow rate 5–35 L/min.
2. Operating environment: 0–40°C, no condensation; the operation panel and electrical control box must be protected against water ingress.
3. Voltage: AC 220V
4. Power: 100W
5. Dimensions: 700 x 420 x 700 mm
