English
Español
Português
Русский
Deutsch
Francés
العربية
한국어
Türk
日本語
News Center
Butyl Bead Shifts After a Spacer Width Change: What to CheckWhen a butyl bead moves off-center immediately after changing spacer width, check the spacer’s physical position before changing the sealant temperature or pressure. The new width may be entered correctly on the screen while the spacer is…
2026/09/10 09:15
How to Choose the Right Working Direction for an IGU Production LineThere is no universally better direction for an automatic IGU production line. A left-to-right line is correct when it follows the factory’s material flow; a right-to-left line is correct when the building, storage area and…
2026/09/09 09:41
Online or Offline Argon Filling: Which Setup Fits Your IGU Production Line?Choose online argon filling when gas filling needs to remain inside a coordinated automatic assembly and pressing process. Consider offline filling when adding the function to an existing line, handling lower or irregular…
2026/09/07 10:53
What Production Records Should an IGU Line Keep for Quality Troubleshooting?The most useful IGU production line records connect every batch with its glass specification, production shift, first-piece result, alarms, downtime and setting changes. When a defect returns, this short timeline helps the…
2026/09/04 13:07
Changing Desiccant? Check Your Molecular Sieve Filling MachineBefore using a new desiccant supplier or bead grade, check that it suits both your insulating glass system and your molecular sieve filling machine. Confirm the material specification, check the permitted particle-size range, and run a…
2026/09/03 14:32
Why Does Glass Feed Sideways in a Horizontal Glass Washer?When glass travels diagonally through a horizontal washer, the cause is usually uneven contact somewhere along its path. The pane may have entered at an angle, one side may be slipping on a dirty roller, or a pressure roller may be pushing…
2026/09/02 17:08
Protective Film Wrinkles or Bubbles on Glass: What Should You Check First?If the protective film starts to wrinkle or trap air, do not immediately assume that the laminating machine is faulty. The cause is often something fairly simple: dust on the glass, a film roll damaged during storage, film…
2026/09/01 14:23
An aluminum spacer frame hanging rack holds formed spacer frames between processing steps. A motorized version moves the hanging supports along an overhead mechanism, bringing frames toward the loading or collection position. It handles frames—not straight aluminum stock or finished glass units.…
2026/08/31 09:36
In many plants, the answer is yes—but only after the water has been checked and treated for its next use. The wash section and the final rinse do different jobs, so they should not automatically receive water of the same quality.Filtered recycled water may be suitable for an earlier washing stage,…
2026/08/28 14:49
JINJIYE Automatic Desiccant Filler Supports Multiple Spacer Frame TypesSpacer specifications can change several times during one production shift. One batch may use a narrow profile for residential windows; the next may require a larger frame or a less common shape.The JINJIYE Automatic Desiccant…
2026/08/26 13:56
How to Choose the Right Glass Vacuum Lifter for IGU ProductionA glass vacuum lifter should not be selected by maximum load capacity alone.Start with the heaviest finished glass unit, then check its dimensions, centre of gravity, surface condition and required movement. A short but heavy panel and a…
2026/08/24 16:16
Can One Automatic Spacer Bending Machine Handle Both Aluminum and Warm-Edge Spacers?Sometimes—but not with the standard configuration in every case.Most automatic spacer bending machines are designed around specific profile materials, widths and bending behaviour. A machine that runs conventional…
2026/08/20 13:45
